Correct procedure for using an anti-static wrist strap

Anti-static wrist strap is a commonly used device in anti-static equipment. It is used on many production lines. Its main function is to conduct the static electricity of the human body to the earth. However, if it is used improperly, the anti-static wrist strap will not work at all. The following editor of Suzhou Hongyida Electronics Co., Ltd. will teach you the correct process of using the wrist strap.

First: The user needs to put his hand into the wrist strap of the anti-static wrist strap. During this process, it should be noted that there should be no clothing isolation between the human skin and the wrist strap. Just tighten the lock.

Second: The grounding wire of the anti-static wrist strap is inserted into the socket of the wrist strap, and then the other end is connected to the grounding socket. In this process, it should be noted that the grounding socket of the anti-static wrist strap should be connected to the ground all the time.

Third: The anti-static wrist strap cannot be used all the time, because the staff will constantly wear out the connection line of the wrist strap when working. Long-term wear and tear will cause the copper wire inside the connection line to disconnect. Generally speaking, the use time of an anti-static wrist strap is about 1-3 months. Therefore, the anti-static wrist strap needs to be tested regularly during use to ensure the normal use of the wrist strap. (The service life of Hongyida wrist strap is 3-6 months)

Fourth: After using the anti-static wrist strap for a certain period of time, even if it is not completely damaged, it needs to be replaced. Because the internal loss will cause the conductive function of the wrist strap to decrease, so that it cannot normally guide the static electricity of the human body, so it must be replaced in time.

The above are the correct procedures for using the anti-static wrist strap. Of course, the user must also be careful during use and do not pull the connecting wire of the wrist strap hard, otherwise pulling will easily break the copper wire inside the connecting wire.